Door leaf Max 1150mm Low noise desigh (<40db) CE ISO9001-2000
SGS Automatic spring door
Door leaf max weight and width: Please refer to the max limit of the door application, overweight
will affect the capacity of the operator. (See below diagram)
Installation measurement: The operator must be installed exactly as the measurements
stipulated by the instruction manual, the improper installation
will decrease the operation of the operator, even cause malfunction
and damage. Make sure the the driving axis is in line of pivot.
Examine and repair exit:prepare the exit for examination and repair.
Glass door requirement: If you use the small door clip, the glass door width must be less
than 900mm for safety, and the glass should be tempered.
- 1. Pay attention to the position mark in the driving axis, the mark
direction point to door leaf.
- 2. Make sure the lintel size is enough.
- 3. The driving axis should be in the vertical line of the bottom
pivot otherwise the door can not be opened or closed properly.
- 4. Tighten all screws of door clips fo 100% safety. If the door clip
is loose, the operator can not identify the accurate door position
and cause trembling.